立创业思想 做创新研究
Drive Machine Drive World
您好，
退出
会员登录
网站首页
组内概况
研究组简介
全组成员
毕业生去向
科研平台
产品开发
学术科研
项目展示
项目成果
专利成果
发表论文
出版著作
荣誉证书
学生获奖
交流合作
论坛讲座
国际/内会议
合作伙伴
研究组年会
新闻中心
行业动态
生活动态
加入我们
招聘信息
联系方式
电子地图
下载中心
下载中心
ABOUT
Research Group
Group Members
Experimental Platform
首页
>>
学术科研
>>
发表论文
学术科研
项目展示
>
项目成果
>
专利成果
>
发表论文
>
出版著作
>
荣誉证书
>
学生获奖
>
发表论文
2023年度
2023
2022年度
2022
2021年度
2021
2020年度
[1] W. Xu, X. Li*, J. Zhu, and Q. Wang, "3D modelling and testing of a stator-magnet transverse-flux linear oscillatory machine for direct compressor drive," IEEE Transactions on Industrial Electronics, 2020, early access.
[2] A. Rahman, O. Farrok, M. Islam, and W. Xu*, "Recent progress in electrical generators for oceanic wave energy conversion," IEEE Access, 2020, early access.
[3] W. Xu, X. Li*, J. Zhu, and Q. Wang, "3D modelling and testing of a stator-magnet transverse-flux linear oscillatory machine for direct compressor drive," IEEE Transactions on Industrial Electronics, 2020, early access.
[4]A. Junejo, W. Xu*, C. Mu, M. Ismail, and Y. Liu, “Adaptive speed control of PMSM drive system based a new sliding-mode reaching law,” IEEE Transactions on Power Electronics, 2020, early access. (SCI检索TOP级1区)
[5]W. Xu, Y. Zhang, G. Du*, M. He, J. Zhu, L. Ning, C. Ye, and W. Hua, “Design and analysis of a hybridly excited asymmetric stator pole doubly salient machine,” IEEE Transactions on Industry Applications, 2020, early access.
[6]W. Xu, Y. Zhang, G. Du*, J. Zhu, and M. He, “No-load performance analysis of an asymmetric-pole single-phase doubly salient permanent magnet machine,” IEEE Transactions on Industrial Electronics, 2020, early access. (SCI检索TOP级1区)
[7]W. Xu, O. Mohammed, Y. Liu*, and R. Islam, "Negative sequence voltage compensating for unbalanced standalone brushless doubly-fed induction generator," IEEE Transactions on Power Electronics, vol.35, no.1, pp. 667 - 680, Jan. 2020. (SCI检索TOP级1区)
[8]Y. Liu, W. Xu*, T. Long, and F. Blaabjerg, "An improved rotor speed observer for standalone brushless doubly-fed induction generator under unbalanced and nonlinear loads," IEEE Transactions on Power Electronics, vol.35, no.1, pp.775 - 788, Jan.2020. (S
[9]G. Du, W. Xu*, J. Zhu, and N. Huang, "Power loss and thermal analysis for high-power high-speed permanent magnet machines," IEEE Transactions on Industrial Electronics, pp.2722 - 2733, vol.67, no.4, Apr.2020. (SCI检索TOP级1区)
[10]X. Chen, W. Xu, Y. Liu*, R. Islam, "Bearing corrosion failure diagnosis of doubly-fed induction generator in wind turbines based on stator current analysis," IEEE Transactions on Industrial Electronics, 2020, in press. (SCI检索TOP级1区)
[11]G. Du, W. Xu*, J. Zhu, and N. Huang, "Effects of design parameters on the multiphysics performance of high-speed permanent magnet machines," IEEE Transactions on Industrial Electronics, 2020, in press. (SCI检索TOP级1区)
[12]W. Xu, K. Yu, Y. Liu*, and J. Chen, "Improved collaborative control of standalone brushless doubly-fed induction generator under unbalanced and nonlinear loads considering voltage rating of converters," IEEE Transactions on Power Electronics, 2020,
[13]W. Xu, X. Xiao, G. Du*, D. Hu and J. Zou, “Comprehensive efficiency optimization of linear induction motors for urban transit," IEEE Transactions on Vehicular Technology, 2020, in press.
[14]W. Xu, E. Alameen, Y. Liu*, and J. Zhu, “An MRAS speed observer based on control winding flux for sensorless control of standalone BDFIGs," IEEE Transactions on Power Electronics, 2020, in press. (SCI检索TOP级1区)
[15]W. Xu, M. Elmorshedy, Y. Liu*, J. Rodriguez, and C. Garcia, "Maximum thrust per ampere of linear induction machine based on finite-set model predictive direct thrust control," IEEE Transactions on Power Electronics, 2020, in press. (SCI检索TOP级1区)
[16]W. Xu, M. G. Hussien, Y. Liu*, and S. M. Allam, “Sensorless control of ship shaft stand-alone BDFIGs based on reactive-power MRAS observer,” Journal of Emerging and Selected Topics in Power Electronics, 2020, in press.
[17]M. Elmorshedy, W. Xu*, S. Al-lam, J. Rodriguez, and C. Garcia, “High performance sliding mode SVM-based direct thrust control of LIMs with secondary flux orientation,” IEEE Transactions on Industrial Electronics, 2020, in press. (SCI检索TOP级1区)
2019年度
[1]G. Du, W. Xu*, J. Zhu, and N. Huang, “Rotor stress analysis for high speed permanent magnet machines considering assembly gap and temperature gradient,” IEEE Transactions on Energy Conversion, vol.34, no.4, pp.2276 - 2285, Dec.2019.
[2]W. Xu, M. Ismaiel, Y. Liu*, and R. Islam, "Parameter optimization of adaptive flux-weakening strategy for permanent-magnet synchronous motor drives based on Particle Swarm algorithm," IEEE Transactions on Power Electronics, vol. 34 , no. 12, pp. 1
[3]Y. Jiang, W. Xu*, C. Mu, J. Zhu, and R. Dian, “An improved third-order generalized integral flux observer for sensorless drive of PMSMs," IEEE Transactions on Industrial Electronics, vol.66, no.12, pp. 9149 – 9160, Dec. 2019. (SCI检索TOP级1区)
[4]W. Xu, K. Yu, Y. Liu* and J. Gao, "Improved coordinated control of standalone brushless doubly fed induction generator supplying nonlinear loads," IEEE Transactions on Industrial Electronics, vol.66, no.11, pp. 8382 - 8393, Nov. 2019. (SCI检索TOP级1区
[5]W. Xu, J. Zou*, Y. Liu, and J. Zhu, “Weighting factorless model predictive thrust control for linear induction machine," IEEE Transactions on Power Electronics, vol.34, no.10, pp. 9916 - 9928, Oct. 2019. (SCI检索TOP级1区)
[6]W. Xu, A. Junejo, Y. Liu*, and R. Islam, “Improved continuous fast terminal sliding mode control with extended state observer for speed regulation of PMSM drive system,” IEEE Transactions on Vehicular Technology, vol.68, no.11, pp .10465 - 10476,
[7]M. He, W. Xu*, J. Zhu, L. Ning, and G. Du, “A novel hybrid excited doubly salient machine with asymmetric stator poles,” IEEE Transactions on Industry Applications, vol.55, no.5, pp.4723 - 4732, Jun. 2019.
[8]W. Xu, M. Elmorshedy, Y. Liu*, R. Islam, and S. Allam, “Finite-set model predictive control based thrust maximization of linear induction motors used in linear metros,” IEEE Transactions on Vehicular Technology, vol.68, no.6, pp. 5443 – 5458, Jun. 2019
[9]W. Xu*, L. Wang, Y. Liu, and F. Blaabjerg, "Improved rotor flux observer for sensorless control of PMSM with adaptive harmonic elimination and phase compensation," China Electrotechnical Society Transactions on Electrical Machines and Systems, vol.3,
[10]X. Cheng, W. Xu*, G. Du, G. Zeng, and J. Zhu, "Novel rotors with low eddy current loss for high speed permanent magnet machines," China Electrotechnical Society Transactions on Electrical Machines and Systems, vol.3, no.2, pp.187-194, Jun. 2019.
[11]W. Xu, R. Dian, Y. Liu*, D. Hu, and J. Zhu, "Robust flux estimation method for linear induction motors based on improved extended state observers," IEEE Transactions on Power Electronics, vol.34, no.5, pp. 4628 - 4640, May 2019. (SCI检索TOP级1区)
[12]D. Hu, W. Xu*, R. Dian, and Y. Liu, “Loss minimization control strategy for linear induction machine in urban transit considering normal force,” IEEE Transactions on Industry Applications, vol.55, no.2, pp. 1536 - 1549, Mar./Apr. 2019.
[13]W. Xu, Y. Jiang, C. Mu, and F. Blaabjerg, “Improved nonlinear flux observer based second-order SOIFO for PMSM sensorless control,” IEEE Transactions on Power Electronics, vol. 34, no.1, pp.565-579, Jan. 2019. (SCI检索TOP级1区)
[14]Y. Liu, W. Xu*, J. Zhu, and F. Blaabjerg, "Sensorless control of standalone brushless doubly-fed induction generator feeding unbalanced loads in ship shaft power generation system," IEEE Transactions on Industrial Electronics, vol. 66, no. 1, pp. 739
2018年度
[1]R. Dian, W. Xu*, J. Zhu, D. Hu, and Y. Liu, “An improved speed sensorless control strategy for linear induction machines based on extended state observer for linear metro drives,” IEEE Transactions on Vehicular Technology, vol.67, no.10, pp.9198-921
[2]Y. Jiang, W. Xu, and C. Mu, “Improved deadbeat predictive current control combined sliding mode strategy for PMSM drive system,” IEEE Trans. Veh. Technol., vol. 67, no. 1, pp. 251-263, Jan. 2018. （SCI一区）
[3]W. Xu, R. Dian, Y. Liu*, D. Hu, and J. Zhu, "Robust flux estimation method for linear induction motors based on improved extended state observers" IEEE Transactions on Power Electronics,DOI 10.1109/TPEL.2018.2865800. (SCI一区)
[4]I. Boldea, L. Tutelea, W. Xu* and M. Pucci, "Linear Electric Machines, Drives and MAGLEVs: an Overview," in IEEE Transactions on Industrial Electronics, vol. PP, no. 99, pp. 1-1.(SCI一区)
[5] C. Mu, W. Liu, and W. Xu*, "Hierarchically adaptive frequency control for EVs-integrated smart grid with renewable energy," IEEE Transactions on Industrial Informatics, vol.14, no.9, pp.4254-4263, Sep. 2018. (SCI一区)
[6]R. Zhu, W. Xu*, C. Ye, J. Zhu, G. Lei, and X. Li, “Design optimization of a novel heteropolar radial hybrid magnetic bearing using magnetic circuit model,” IEEE Transactions on Magnetics, vol.54, no.3, Article Number: 8201105, Mar. 2018.
[7]X. Li, W. Xu*, C. Ye, and I. Boldea, "Comparative study of transversal-flux permanent magnetic linear oscillatory machines for compressor," IEEE Transactions on Industrial Electronics, vol.65, no.9, pp.7437-7446, Sep. 2018. (SCI一区)
[8]O. Farrok, M. Islam, Y. Guo, J. Zhu, and W. Xu，“A novel design procedure for designing linear generators," IEEE Transactions on Industrial Electronics, vol.65, no.2, pp.1846 - 1854, Feb. 2018.
[9]Y. Zhao, X. Xiao, and W. Xu*, “Accelerating optimal shape design of linear machines by transient simulation using mesh deformation and mesh connection techniques,” IEEE Transactions on Industrial Electronics, vol.65, no.12, pp. 9825-9833, Dec. 2018.
[10]M. He, W. Xu, and C. Ye*, “Torque analysis and improvement of single-phase asymmetric-stator-pole doubly salient permanent magnet machine,” IEEE Transactions on Magnetics, vol.54, no.11, Article Number: 8107306, Nov. 2018.
[11]D. Hu, W. Xu*, R. Dian, Y. Liu, and J. Zhu, “Loss minimization control of linear induction motor drive for linear metros,” IEEE Transactions on Industrial Electronics, vol.65, no.9, pp.6870-6880, Sep. 2018. (SCI一区)
[12]J. Zou, W. Xu*, J. Zhu, and Y. Liu, “Low-complexity finite control set model predictive control with current limit for linear induction machines,” IEEE Transactions on Industrial Electronics, vol.65, no.12, pp. 9243 – 9254, Dec. 2018. (SCI一区)
[13]W. Xu, K. Yu, Y. Liu* and J. Gao, "Improved coordinated control of standalone brushless doubly-fed induction generator supplying nonlinear loads," IEEE Transactions on Industrial Electronics, pp, Dec. 2018. (SCI一区).
2017年度
[1]Y. Liu, W. Xu*, and G. Yu, “Performance analysis of the stand-alone brushless doubly-fed induction generator by using a new T-type steady-state model,” Journal of Power Electronics, Jul. 2017, vol.17, no.4, pp.1027-1036. (SCI)
[2]R. Zhu, W. Xu*, C. Ye, and J. Zhu, “Novel Heteropolar radial hybrid magnetic bearing with low rotor core loss,” IEEE Transactions on Magnetics, vol.53, no.11, May 2017.(SCI)
[3]J. Zou, W. Xu*, and C. Ye, “Improved deadbeat control strategy for linear induction machine,” IEEE Transactions on Magnetics, vol.53, no.6, Article# 8106804, Mar. 2017. (SCI)
[4]L. Tang, W. Xu*, and C. Mu, “Analysis for step-size optimization on MPPT algorithm for photovoltaic systems,” IET Power Electronics, vol.10, no.13, pp.1647 – 1654, Oct. 2017. （SCI）
[5]J. Zou, W. Xu*, X. Yu, Y. Liu, and C. Ye, “Multistep model predictive control with current and voltage constraints for linear induction machine based urban transportation,” IEEE Trans. Veh. Technol., vol.66, no.12, pp.10817-10829, Dec. 2017 (SCI)
[6]C. Mu, W. Liu, W. Xu*, and M. Islam, “Adaptive tracking control for a class of continuous-time uncertain nonlinear systems using the approximate solution of HJB equation,” International Journal of Photoenergy, vol. 2017, pp.1, Apr. 2017 (SCI)
[7]M. He, W. Xu*, and C. Ye, “Novel single phase doubly salient permanent magnet machine with asymmetric stator poles,” IEEE Transactions on Magnetics, vol.53, no.6, June 2017. (SCI)
[8]李想, 徐伟, 叶才勇. 新型定子永磁型动铁心式横向磁通直线振荡电机[J]. 中国电机工程学报, 2017, 37(21): 6209-6217.
[9] X. Li, W. Xu*, C. Ye, and J. Zhu, “Novel hybrid-flux-path moving-iron linear oscillatory machine with magnets on stator,” IEEE Transactions on Magnetics, vol.53, no.11, Article # 8210405, Nov. 2017.
[10] C. Ye, J. Yang, X. Liang, and W. Xu*, “Design and research of a high speed and high frequency pulsed alternator,” IEEE Transactions on Plasma Science, vol.45, no.7, pp.1512-1518, Jul. 2017.
[11] T. Wang*, C. Liu, W. Xu, G. Lei, M．Jafari, Y. Guo, and J. Zhu, "Fabrication and experimental analysis of an axially laminated flux switching permanent magnet machine," IEEE Transactions on Industrial Electronics, vol.64, no.2, pp.1081-1091, Feb. 2017
2016年度
[1]C. Mu, C. Sun, and W. Xu*, “Fast sliding mode control on air-breathing hypersonic vehicles with transient time analysis,” Journal of Systems and Control Engineering（Part I）, vol. 230, no.1, pp.23-34, Jan. 2016. (SCI)
[2]W. Xu and M. He, “Novel 6/7 stator/rotor hybrid excitation doubly salient permanent magnet machine,” IEEE Transactions on Magnetics, vol.52, no.7, pp.1-5, Jul. 2016. (SCI)
[3]W. Xu and M. He, “Novel 6/7 stator/rotor hybrid excitation doubly salient permanent magnet machine,” IEEE Transactions on Magnetics, vol.52, no.7, pp.1-5, Jul. 2016.(SCI)
[4]W. Xu, M. He, and C. Ye*, “Novel synchronous machine with permanent magnet in stator yoke,” IEEE Transactions on Applied Superconductivity, vol.26, no.7, pp.1-5, Oct. 2016. (SCI)
[5]W. Xu, J. Zou, and C. Mu*, “Improved model predictive current control strategy based rotor flux for linear induction machines,” IEEE Transactions on Applied Superconductivity, vol.26, no.7, pp.1-5, Oct. 2016. (SCI )
[6]X. Wang, W. Xu*, Y. Zhao, and X. Li, “Modified MPC algorithm for NPC inverter fed disc coreless permanent magnet synchronous motor,” IEEE Transactions on Applied Superconductivity, vol.26, no.7, pp.1-5, Oct. 2016. (SCI )
[7]Z. Wang, W. Xu*, G. Lei, and J. Zhu, “Multilayer windings effect on performance of flux-switching permanent magnet machines,” IEEE Transactions on Applied Superconductivity, vol.26, no.7, pp.1-4, Oct. 2016. (SCI)
[8]R. Dian, W. Xu*, and C. Mu, “Improved negative sequence current detection and control strategy for H-bridge three-level active power filter,” IEEE Transactions on Applied Superconductivity, vol.26, no.7, pp. 1-5, Oct. 2016. (SCI)
[9]W. Xu, Y. Jiang, and C. Mu*, “Novel composite sliding mode control for PMSM drive system based on disturbance observer,” IEEE Transactions on Applied Superconductivity, vol.26, no.7, pp. 1-5, Oct. 2016. (SCI)
[10] C. Mu, W. Xu*, C. Sun, and H. Jia, “On switching manifold design for terminal sliding mode control,” Journal of The Franklin Institute, vol. 353, no. 7, pp.1553-1572, May 2016.
2015年度
[1] C. Ye, K. Yu, W. Xu*, and H. Zhang, “Optimal design and experimental research of capacitor-charging pulsed alternator,” IEEE Transactions on Energy Conversion, vol.30, no.3, pp.948-956, May/Jun. 2015.
[2] D. Li*, R. Qu, W. Xu, J. Li, and T. Lipo, "Design procedure of dual-stator, spoke-array vernier permanent magnet machines", IEEE Transactions on Industry Applications, vol.51, no.4, pp.2972-2983, Jul./Aug. 2015.
2014年度
[1]Fei Xiong，Xuefan Wang．Design of a low-harmonic-content wound rotor for the brushless doubly fed generator．IEEE Transactions on Energy Conversion，2014， 29(1) ，158-168．(SCI)
[2]G. Lei, W. Xu, J. Hu, J. Zhu, Y. Guo, and K. Shao, “Multilevel design optimization of FSPMM drive system by using sequential subspace optimization method,” IEEE Transactions on Magnetics, vol.50, no.2, pp. 685-688, Feb. 2014. (SCI)
[3]J. Rao and W. Xu*, "Modular stator high temperature superconducting flux-switching machines," IEEE Transactions on Applied Superconductivity, vol.24, no.5, pp. 1-5, Oct. 2014. (SCI)
[4]W. Xu, C. Mu*, and J. Jin, "Novel linear iteration maximum power point tracking algorithm for photovoltaic power generation," IEEE Transactions on Applied Superconductivity, vol.24, no.5, pp.1-6, Oct. 2014. (SCI)
[5]Y. Lei, W. Xu*, C. Mu, Z. Zhao, H. Li, and Z. Li, “New hybrid damping strategy for grid-connected photovoltaic inverter with LCL filter,” IEEE Transactions on Applied Superconductivity, vol.24, no.5, pp. 1-8, Oct. 2014. (SCI)
[6]J. Jin, W. Xu*, X. Chen, L. Wen, and S. Wang; “Flux flow loss of HT-SMES coil during energy exchange,” IEEE Transactions on Magnetics, vol.50, no.11, pp.1-4, Nov.2014. (SCI)
[7] W. Xu*, "Novel decoupling model based predictive current control strategy for flux-switching permanent magnet synchronous machines with low torque ripple and switching loss," IEEE Transactions on Applied Superconductivity, vol.24, no.5, Article#: 060
2013年度
[1]唐磊，曾成碧，徐伟，苗红, “一种新颖的光伏自适应变步长最大功率点跟踪算法,” 电力自动化设备, Vol．33， No．11 , pp.128-133，Nov. 2013. (EI)
2012年度
[1]W. Xu, G. Sun, L. Wen, W. Wu, and P. Chu, "Equivalent circuit derivation and performance analysis of a single-sided linear induction motor based on the winding function theory," IEEE Trans. Veh. Technol.,vol.61,no.4,pp.1515-1525, May 2012.(SCI)
[2]W. Xu, G. Lei, T. Wang, X. Yu, J. Zhu, and Y. Guo, “Theoretical research on new laminated structure flux switching permanent magnet machine for novel topologic plug-in hybrid electrical vehicle,”IEEE Trans on Magn.,vol.48,no.11,pp.4050-405, Nov.2012.
[3]Fei Xiong，Xuefan Wang．Parameter calculation of brushless doubly-fed machine based on the genetic algorithm．Advanced Materials Research: Progress in Power and Electrical Engineering，2012，354-355：1261-1264．
[4]熊飞，王雪帆，程源．不等匝线圈转子结构的无刷双馈电机研究．中国电机工程学报，2012，32(36) ：82-88．(EI)
[5]Y. Zhang, J. Zhu, Z. Zhao, W. Xu, and D. Dorrell, “An improved direct torque control for three-level inverter-fed induction motor sensorless drive,” IEEE Transactions on Power Electronics, vol.27, no.3, pp.1502-1513, Mar.2012.(SCI)
2011年度
[1]J. Jin*, L. Zheng, W. Xu, Y. Guo, and J. Zhu, “Thrust characteristic of a double-sided HTSLSM with an HTS magnetic suspension system”, Journal of Applied Physics, vol.109, no.7, 073916-073916-4, Apr. 2011.(SCI)
[2]J. Jin*, L. Zheng, W. Xu, Y.G. Guo, and J. Zhu, “Influence of external traveling-wave magnetic field on trapped field of an HTS bulk magnet in an HTSLSM”, Journal of Applied Physics, vol. 109, no. 11, pp. 113913-113913-4, Jun. 2011. (SCI)
[3]W. Xu, J. Zhu, Y. Zhang, Y. Guo, and G. Lei, “New axial laminated-structure flux switching permanent magnet machine with 6/7 poles,” IEEE Transactions on Magnetics, vol.47. no.10, pp. 2823-2826, Oct.2011. (SCI)
[4] Y. Zhang*, J. Zhu, W. Xu, and Y. Guo, “A simple method to reduce torque ripple in direct torque controlled permanent magnet synchronous motor by using vectors with variable amplitude and angle,” IEEE Transactions on Industrial Electronics, vol. 58, n
2010年度
[1]熊飞，王雪帆，张经纬，阚超豪．绕线转子无刷双馈电机的链型等效电路模型．电工技术学报，2010，25(2)：15-21．(EI)
[2]W. Xu, J. Zhu, Y. Zhang, Y. Li, Y. Wang, and Y. Guo, “An improved equivalent circuit model of a single-sided linear induction motor,” IEEE Transactions on Vehicular Technology, vol.59, no.5, pp.2277-2289, Jun. 2010. (SCI)
[3]J. An, G. Wen, and W. Xu, “Improved results on fuzzy H infinity filter design for T-S fuzzy systems,” Discrete Dynamics in Nature and Society, vol.2010, pp.1-21, Jul. 2010. (SCI)
[4]W. Xu, J. Zhu, Y. Zhang, Z. Li, Y. Li, Y. Wang, Y. Guo and Y.J. Li, “Equivalent circuits for single-sided linear induction motors,” IEEE Transactions on Industry Applications, vo.46, no.6, pp.2410-2423, Nov./Dec. 2010. (SCI)
2010年以前
[1]熊飞，苏学荣，何凌云．绕线式无刷双馈电机转子绕组设计．微电机，2009，42(6)：1-7．(EI)
[2]熊飞，王雪帆，张经纬，阚超豪．无刷双馈电机的小信号模型稳定性分析．中国电机工程学报，2009，29(33)：117-123．(EI)
[3]贾贵玺, 徐伟*, “电子式感应电机的软启动过程,” 天津大学学报, vol.38, no.1, pp.18-21, Jan. 2005. (EI)
[4]徐伟，孙广生，李耀华，金能强, “一种新型的直线异步电机参数测量方案, ”电工技术学报, vol.22, no.6, pp.54-58, Jun. 2007. (EI)
[5]徐伟，汪旭东，袁世鹰, “交通牵引大功率单边直线感应电机的性能研究,” 电机与控制学报,vol.12, no.4, pp.396-402, Jul. 2008. (EI)
[6]徐伟，李耀华，孙广生，何晋伟，杜玉梅，谈龙成; 任晋旗，王珂，韩俊飞，金能强, “交通用大功率直线异步电动机牵引特性,” 电工技术学报, vol. 23, no.7, pp.14 -20, Jul.2008. (EI)
[7]任晋旗,李耀华,徐伟,王珂, “直线感应电机在线参数辨识,” 中国电机工程学报, vol.28, no.24, pp.113- 117, Sep. 2008.(EI)
[8]徐伟，李耀华，孙广生，任晋旗，谈龙成，何晋伟，韩俊飞，王珂, “基于绕组函数法的大功率单边直线感应电机牵引特性研究,” 中国电机工程学报, vol.28, no.33, pp.54-60, Nov.2008. (EI)
[9]徐伟，李耀华，孙广生，任晋旗，王江波，谈龙成, “短初级单边直线感应电机新型等效电路,”中国电机工程学报, vol.29, no.9, pp.80-86, Mar. 2009. (EI)
首页
上一页
下一页
尾页
地址：湖北省武汉市洪山区珞喻路1037号 邮箱：weixu@hust.edu.cn 传真：18672395238 联系人： 徐伟
版权所有：华中科技大学CECS能量转换系统研究组
